Industrial Tools
Torque Systems

Sturtevant Richmont Exacta 2

Capacity 25 / 75 / 150 / 250 / 400 / 600 lbf·ft

Documented Error-Proof Torque Control for Assembly Operations

 

Sturtevant Richmont's Exacta 2 line sets a new standard for digital torque wrench performance in assembly, maintenance and auditing. Better still, this new design as robust as it is accurate and reliable. The three modes of operation on board – Track, Peak and Residual – permit use in almost every circumstance. Programmable limits with visual notification. Supplementing the visual information are audible prompts from a beeper. You’ll always know when the torque is right. The Residual mode assists the user in determining retained torque on a joint.

 

Exacta 2 has a Yellow/Green/Red illumination system to guide you as you use the wrench. The display and a raised lens on the back of the wrench both illuminate when each significant torque value is reached. An LED provides a Yellow/Orange light as you approach the minimum torque specification. The light turns Green when you reach the minimum torque, and remains green until you either stop pulling on the wrench or the maximum torque specification is attained. If you overtorque, it turns bright Red to let you know. Just pull to Green!

 

Fatures and Benefits

 

  • Bi-directional accuracy of ± 1% of Indicated Value from 20% to 100% of capacity in Track and Peak modes meets or exceeds requirements of ASME B107.29M and ISO 6789.
  • Large, bright display can be read at arms length, even in shadow.
  • Yellow/Green/Red color scheme informs operator of tightening status.
  • Simple front panel programming. Four keyswitches on the front of the Exacta 2 electronics module permit programming and operation of all key functions.
  • 999 memory locations can be accessed, reviewed, uploaded and printed.
  • Thousands of cycles between battery charges.
  • Rugged aluminium electronics housing for durability.
  • FREE certification from ISO/IEC 17025 Accredited Calibration Laboratory! Models 25 & 75 incl. SD-3/8" interchangeable head, model 150 incl. SD-1/2" interchangeable head.

 

Exacta 2 comes with a serial cable for communication with a PC, and can download readings as they are taken, or in a batch mode! The readings can be saved as a text file and imported by almost any statistical or spreadsheet software. This is an invaluable aid when performing process design and process analysis!

 

Optional Accessories

 

  • Four of six models offer the SR dovetail so you can use almost any of over 100 SR interchangeable heads which you will find in section Torque Wrenches.
  • Free Exawin software for programming Exacta® 2 from a PC. The Exawin software permits downloading maximum and minimum torque limits, units of measure and other key operating functions directly from a PC. It does so with ease and simplicity.
  • Needs four (4) NiMH rechargeable batteries AA-2200 (IEC HR6). Do NOT use other NiMH batteries in these tools. Other batteries do not have the same operating characteristics and can deliver reduced accuracy and/or damage the tool. Do NOT use Alkaline batteries in these tools. Using alkaline batteries will damage the tools and such damage is not covered by warranty.
  • Replacement batteries, pack of four, 2200 mAh NiMH rechargeable, # R21258.

 

Exacta 2 with Quick Change dovetail head (QC)

 

For those applications where rapid and frequent head size changes are required SR offers the Quick Change heads. The regular dovetail use the pin and spring embedded in the dovetail. The Quick Change dovetail uses a ball bearing and spring which facilitates the use of thumb power. Rather than using a small, flat head screwdriver or our CART tool to depress the pin and remove the head, at customer request SR designed these wrenches to make a head change only using pressure from your thumb.

 

Everything had a trade off. While the QC style dovetail makes interchangeable head changes very fast, size and torque limitations come into play. We recommend that you use heads of 1 1/4 inches or smaller and 250 ft lbs / 339 Nm is the highest torque level where the QC configuration can be used. Your safety is always our concern.

 

(see chart 'QC' below)

Exacta 2
Model Item No. Torque Range N·m Torque Range lbf·ft Torque Range lbf·in Length mm Weight kg Tool holder
Exacta2 25 R10530 68 - 34 5 - 25 60 - 300 409 1.27 Dovetail
Exacta2 75 R10531 20 - 100 15 - 75 180 - 900 493 1.36 Dovetail
Exacta2 150 R10532 40 - 200 30 - 150 360 - 1800 546 1.40 Dovetail
Exacta2 250 R R10533 68 - 340 50 - 250 600 - 3000 640 1.86 R 1/2
Exacta2 250 R10536 68 - 340 50 - 250 600 - 3000 640 1.83 Dovetail
Exacta2 400 R R10537 108 - 540 80 - 400 960 - 4800 927 3.49 R 3/4
Exacta2 400 R10535 108 - 540 80 - 400 960 - 4800 927 3.49 Dovetail
Exacta2 600 R R10534 160 - 800 120 - 600 1440 - 7200 1516 5.90 R 3/4
Exacta 2 QC
Model Item No. Torque Range N·m Torque Range lbf·ft Torque Range lbf·in Length mm Weight kg Tool holder
Exacta2 QC 25 R10521 6.8 - 34 50 - 25 60 - 300 409 1.27 Dovetail QC
Exacta2 QC 75 R10522 20 - 100 15 - 75 180 - 900 493 1.36 Dovetail QC
Exacta2 QC 150 R10523 40 - 200 30 - 150 360 - 1800 546 1.40 Dovetail QC
Exacta2 QC 250 R10518 68 - 340 50 - 250 600 - 3000 640 1.86 Dovetail QC

The requirements and verification procederes of the DIN EN ISO 6789 are valid for a measuring range from 20% to 100% of the rated capacity (maximum value). The effective span of a torque tool may differently begin lower.

All specifications without guarantee, errors and omissions excepted.

 

Data pricacy and cookies

This site uses cookies. Please choose. Please specify which cookies you want to allow.

These cookies are necessary for the execution of the specific functions of the website and can not be deselected. These cookies are not for tracking.

 

Advertising cookies are used to display advertising that suits your browsing habits best.

These cookies help us to understand how our website is used. This allows us to improve our performance for you. Zudem werden externe Anwendungen (z.B. Google Maps) mit Ihrem Standort zur einfachen Navigation beliefert.