Yokota YLa-JQ series
Lightweight PokaYoke Impulse Wrench with Controlled Shut-Off
The lightweight Yokota YLa-J series impulse wrenches with double chamber air motor achieve the required torque very quickly. These hi-tec tools generate a higher number of impulses per second, and therefore very accurate torques can be realised, resulting in decreased production cycle time. Design innovation and the application of new materials significantly reduce the weight and increase the service intervals.
Yokota impulse wrenches are widely used for tightening jobs in the assembly industry, where accurate torque tolerances are necessary. Impulse tools are light, powerful, small and very importantly, have no kick-back. Evaluation of tightening processes in car assembly shows that tightening joints uses 10% of the total assembly time. Working with faster tools therefore can speed up assembly lines substantially.
In combination with the Poka Yoke controller YTC-3 predefined monitoring parameters will effect an optimized clamping force by electronically controlled shut-off. Applying reaction-free Yokota impulse wrenches at the assembly line will also reduce the RSI risk significantly.
- Less oil mist due to self-lubricating blades and cylinder.
- Extended oil-change intervals.
- Reduced weight.
- Reduced air consumption due to higher air motor efficiency.
- High durability due to special coated rotor blades (PAT.P).
- Improved ergonomic design.
- Reduced noise and vibration levels.
- Reduced trigger force.
|Model *||Item No.||Sq.D [inch]||Hx.D [inch]||Bolt Capacity||Free Speed [1/min]||Torque Range [N·m]||Air Cons. [l/s]||Weight [kg]|
|YLA-60A-JQ||430405||–||1/4||M6||4000||11 - 20||5.0||0.78|
|YLA-70A-JQ||430420||–||1/4||M6 - M8||7000||20 - 28||5.5||0.80|
|YLA-80A-JQ||430440||–||1/4||M8||7000||24 - 35||5.8||0.90|
|YLA-60E-JQ||430400||3/8||–||M6||4000||13 - 22||5.0||0.78|
|YLA-70E-JQ||430410||3/8||–||M6 - M8||7000||23 - 35||5.5||0.80|
|YLA-80E-JQ||430430||3/8||–||M8||7000||32 - 50||5.8||0.90|
|YLA-90E-JQ||430450||3/8||–||M8 - M10||6500||45 - 68||6.7||1.00|
|YLA-110E-JQ||430460||1/2||–||M10 - M12||6000||63 - 105||9.6||1.40|
|YLA-120E-JQ||430470||1/2||–||M12||6600||80 - 130||10||1.80|
|YLA-140E-JQ||430480||1/2||–||M14||6000||100 - 160||13||2.20|
* The 3/8” and 1/2” square drive models feature a locking pin enabling fast change of sockets. Specified technical data are measured on the Yokota torque tester series YET at a dynamic air pressure of 0.63 MPa.
All specifications without guarantee, errors and omissions excepted.