Colour Marking Torque Tools
With a colour marking torque wrench, any screw or bolt connections that may have been overlooked can be identified at a glance. The marking liquid ("ink") dries quickly and is thus permanently applied.
Operating principle: As soon as the click torque wrench reaches the preset torque value, the marking mechanism is also triggered. The marker cartridge contains a felt tip through which the colored marking fluid is dispensed ("stamped") onto the fastener. Tightening and marking of the bolt or nut thus take place in a single operation. If the preset torque value is not reached, marking is not performed.
- TOHNICHI series MNTD:
- Preset clic-type screwdriver for special cross bits P1 / P2 / P3 // hex bits 2.5 / 3 / 4 / 5 mm
- Marking colours blue or red
- Capacity 120 / 260 / 500 cNm
- TOHNICHI series CMQSP:
- Ratchet head preset clic-type wrench with hex drive bits ("Allen"); A/F 5 / 6 / 8 / 10 mm
- Marking colours white or yellow
- Capacity 25 / 50 / 100 / 140 Nm
- TOHNICHI series MCSP:
- Preset clic-type torque wrench for special spanner heads; A/F 10...32 mm
- Marking colours blue or red
- Capacity 50 / 100 / 140 Nm
- TOHNICHI series MPCL:
- Pre-Lock clic-type torque wrench for special spanner heads; A/F 10...32 mm
- Marking colours blue or red
- Capacity 50 / 100 / 140 Nm
- TOHNICHI series MPQL:
- Ratchet head pre-lock clic-type wrench with special MH sockets; A/F 10...30 mm
- Marking colours blue or red
- Capacity 50 / 100 / 140 / 200 / 280 Nm
- TOHNICHI series MQSP:
- Ratchet head preset clic-type wrench with special MH sockets; A/F 10...24 mm
- Marking colours blue or red
- Capacity 50 / 100 / 140 / 200 Nm